Bobcat 763 Error Codes

Bobcat 763 Error Codes were written to give the owner / operator instructions on the safe operation and maintenance of the Bobcat vehicle.

Viewing Service Codes At Bobcat 763

Press the Information button to cycle the data display until the service code screen is displayed. If more than one service code is present, the codes will scroll on the data display.

Dimensions

Height to Top of Cab 6.5 ft (1.98 m)

Hinge pin height, maximum height 114.6 in (291.08 cm)

Length with Bucket 10.9 ft (3.32 m)

Wheelbase 3.4 ft (1.04 m)

Width Over Tires 5.5 ft (1.68 m)

Engine

Displacement 134.3 cu in (0.0022 m)

Engine Make Kubota

Engine Model V2203-EB

Gross Power 46 hp (34.3 kw)

Number of Cylinders 4

Hydraulic

Pump Flow Capacity 14.8 gal/min (56.02 L/min)

Loader

Bucket Width 68 in (172.72 cm)

Tipping load (ISO 14397) 3000.5 lbs (1361 kg)

Operational

Max Speed 7 mph (11.26 kph)

Operational Weight 5368.3 lbs (2435 kg)

Tire Size 10-16.5

BOBCAT 763 SERIAL NUMBER LOCATIONS

Always use the serial number of the loader when requesting service information or when ordering parts. Early or later models (identification made by serial number) may use different parts, or it may be necessary to use a different procedure in doing a specific service operation.

Serial Number

Bobcat 763 serial number plate is located on the outside of the loader frame.

Explanation of Serial Number:

The four digit Model / Engine Combination Module number identifies the model number and engine combination.
The five digit Production Sequence Number identifies the order which the loader is produced.

Bobcat 763 Error Code List

View list of Bobcat 763 model fault codes.

Totally 3843 bobcat fault codes.

BOSS SERVICE CODES

AF - Air Filter

b - Battery

FUEL - Fuel Level

HC - Hydraulic Oil Temperature

HF1 - Hydraulic Charge Filter

HF2 - Engine Return Filter

EC - Engine Coolant Temperature

ECL - Engine Coolant Level

EP - Engine Oil Pressure

ES - Engine Speed

HP - Hydraulic Oil Pressure

uP - BOSS Warning

-1 - Shutdown (Engine can be restarted for 30 second periods to move loader)

-2 - Warning

-3 - Wiring Not Connected

-4 - Wiring Shorted

-5 - High Sensor Voltage

-6 - No Signal

-7 - Out of Range